Bluelab Probe Care Kit – pH & Conductivity. Everything you need to clean, hydrate and calibrate pH probes as well as clean and test conductivity (ppm/EC) probes. The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth. Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe. The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately. A tip… if the conductivity reads low, the probe needs cleaning. pH probes specifically, should be kept wet at all times for optimal performance and life. Everything you need to clean, calibrate and maintain your pH and conductivity probes Your Bluelab Probe Care Kit – pH and Conductivity contains: Equipment 1x Probe care instructions 3x Plastic cups 1x Bluelab pH Probe Cleaner, 30 ml / 1 fl.oz Bluelab Conductivity Probe Cleaner, 30 ml / 1 fl.oz 1x Toothbrush 1x Chamois Solution 2x Single-use pH 4.0 Calibration Solution Sachets, 18 ml / 0.6 fl.oz 2x Single-use pH 7.0 Single-use Calibration Solution Sachets, 18 ml / 0.6 fl.oz 2x Single-use 2.77 EC Conductivity Standard Solution Sachets, 18 ml / 0.6 fl.oz 2x KCl Storage Solution, 18 ml / 0.6 fl.oz
